COMPANY HEADER
Request Information
Draw-wire K series sensors are designed for industrial serial applications in indoor and outdoor use. Their compact and robust housing made from glass-fiber reinforced plastic and their durable sensor design with separate drum and spring spaces offer increased protection against environmental influences. Their modular sensor design enables fast and low cost OEM customization. Specially in outdoor use, these sensors can be optimally adapted to the respective application. Draw-wire K series sensors are used in mobile machines, cranes and lifting technology.
Unit of Measure

Specifications

Measurement Range

 N/A 3500 mm

Analog Output

 N/A Current Potentiometer Voltage

Resolution

 N/A Towards Infinity

Linearity ≤ 0.25% Full Scale Output (FSO)

 N/A ≤±8.75 mm

Sensor Element

 N/A Hybrid Potentiometer

Approximate Maximum Wire Extension Force

 N/A 8 N

Approximate Minimum Wire Retraction Force

 N/A 2 N

Approximate Maximum Wire Acceleration

 N/A 5 g.

Housing Material

 N/A Glass-Fiber Reinforced Plastic

Measuring Wire Diameter

 N/A 0.61 mm

Measuring Wire Material

 N/A Polyamide-Coated Stainless Steel

Wire Mounting

 N/A Wire Clip

Mounting

 N/A Through-Bores ø 6.4 mm and Mounting Nuts (for M6) on the Sensor Housing

Storage Temperature Range

 N/A -40 to 85 ºC

Operation Temperature Range

 N/A -40 to 85 ºC

Connection

 N/A Integrated Cable, Radial, Length 1 m

Shock (DIN-EN 60068-2-27)

 N/A 50 g5 ms in 3 axes, 2 directions and 1000 shocks each

Vibration (DIN-EN 60068-2-6)

 N/A 20 g20 to 2000 Hz in 3 axes and 10 cycles each

Protection Class (DIN-EN 60529)

 N/A Ingress Protection (IP69K)

Approximate Weight

 N/A 500 g

Characteristics

Characteristics

 N/A
  • Quick and flexible modifications for OEM purposes
  • Durable and robust sensor design (IP69K)
  • Compact sensor with large measuring range
  • Potentiometer, current or voltage output

Installation Instructions

Installation Instructions

 N/A Wire attachment: during installation, do not allow at any time the measuring wire to freely return.

Angle of wire outlet: Make sure during installation that the wire outlet is straight (tolerance of ±3º). Exceeding this tolerance leads to increased wear of the wire material and on the wire outlet.