COMPANY HEADER
Print Back
The capaNCDT DT61x4 is an active, capacitive system for displacement, distance and position measurements. Consisting of a sensor with integrated preamplifier, a robust cable and a compact controller, the measuring system is immediately ready for use without any on-site calibration. The measuring system is available with a cable length up to 15 m and is ideal for automation purposes. The capaNCDT 61x4 is particularly suitable for automated robot manufacturing and measurement tasks with a drag chain. Moreover, it is used in machine building and semiconductor production. For optimum signal quality, the desired cable length is already factory-calibrated.
Unit of Measure

Specifications

Cable Length

 N/A Up to 15 m

Digital Interface Data Rate

 N/A Model DT6124/5 and DT6124/15 - 24 bitsModel DT6124/5 and DT6124/15 - 230400 Baud

Controllers

Controller Model

 N/A DT6114/15 DT6114/5 DT6124/15 DT6124/5

Static Resolution at 2 Hertz (Hz) Full Scale Output (FSO)

 N/A 0.01 %

Dynamic Resolution at 1 Kilohertz (kHz) Full Scale Output (FSO)

 N/A 0.015 %

Frequency Response at -3 Decibel (dB)

 N/A 1 kHz

Maximum Selectable Measuring Rate

 N/A Model DT6124/15 - 2 kSa/sModel DT6124/5 - 2 kSa/s
Linearity Full Scale Output (FSO)1 N/A Model DT6114/15 - <±0.25 %Model DT6114/5 - <±0.1 %Model DT6124/15 - <±0.25 %Model DT6124/5 - <±0.1 %

Temperature Stability Full Scale Output (FSO)

 N/A <100 %/K

Sensitivity Full Scale Output (FSO)

 N/A <±0.2 %

Long-Term Stability Full Scale Output (FSO)

 N/A <0.05 %/month

Synchronization

 N/A No

Direct Current (DC) Supply Voltage

 N/A 9 to 36 V

Power Consumption at 24 Volts (V) Direct Current (DC) Voltage

 N/A Model DT6114/5 and DT6114/15 - 1.32 WModel DT6124/5 and DT6124/15 - 1.44 W
Digital Interface2 N/A Model DT6124/5 and DT6124/15 - RS485
Analog Output Voltage3 N/A 0 to 10 V

Optional Analog Output Voltage

 N/A ±5 V

Sensor Connection

 N/A 5-pin Connector

Supply Connection

 N/A Model DT6114/5 and DT6114/15 - 5-pin connector (suitable connection cable SCAC3/5 included) Model DT6124/5 and DT6124/15 - 6-pin connector (suitable connection cable SCAC3/6 included)

Signal Connection

 N/A Model DT6114/5 and DT6114/15 - 5-pin connector (Suitable connection cable SCAC3/5 included) Model DT6124/5 and DT6124/15 - 6-pin connector (Suitable connection cable SCAC3/6 included)

Mounting (Controllers)

 N/A 2 x through bores for M4 screw

Storage Temperature (Controllers)

 N/A -10 to 75 ºC

Operating Temperature (Controllers)

 N/A 10 to 60 ºC

Shock (DIN-EN 60068-2-27) (Controllers)

 N/A 5 ms, 6 axes, 1000 shocks each, criterion B 20 g

Vibration (DIN-EN 60068-2-6) (Controllers)

 N/A 10 Hz to 49.8 Hz: 1 mm, 49.8 Hz to 2000 Hz 3 axes 10 cycles each, criterion B 10 g

Protection Class (DIN-EN 60529) (Controllers)

 N/A Ingress Protection (IP40)

Approximate Weight (Controllers)

 N/A 165 g

Compatibility (Controllers)

 N/A Compatible with active sensors of type CSHA

Sensors

Sensors Model

 N/A CSHA2FL-CRa15 CSHA2FL-CRa5

Measuring Range (Reduced)

 N/A Model CSHA2FL-CRa15 - 1 mmModel CSHA2FL-CRa5 - 1 mm

Measuring Range (Nominal)

 N/A Model CSHA2FL-CRa15 - 2 mmModel CSHA2FL-CRa5 - 2 mm

Measuring Range (Expanded)

 N/A Model CSHA2FL-CRa15 - 4 mmModel CSHA2FL-CRa5 - 4 mm
Resolution (Industrial)4 N/A 300 nm
Linearity5 N/A Model CSHA2FL-CRa15 - <±5 µmModel CSHA2FL-CRa5 - <±2 µm
Temperature Stability6 N/A <0.2 µm/K

Minimum Target Flat Diameter

 N/A 17 mm

Connection

 N/A Model CSHA2FL-CRa15 - Integrated cable, length 15 m, drag-chain suitable; minimum bending radius: dynamic 60 mm (15 x ø 4.0 mm) Model CSHA2FL-CRa5 - Integrated cable, length 5 m, drag-chain suitable; minimum bending radius: dynamic 60 mm (15 x ø 4.0 mm)

Mounting (Sensors)

 N/A 4 x through-bores for M2 screw

Storage Temperature (Sensors)

 N/A -40 to 80 ºC

Operating Temperature (Sensors)

 N/A -40 to 80 ºC

Non-Condensing Relative Humidity

 N/A 0 to 95 %

Shock (DIN-EN 60068-2-27) (Sensors)

 N/A 5 ms, 6 axes, 1000 shocks each 50 g

Vibration (DIN-EN 60068-2-6) (Sensors)

 N/A 10 Hz to 46.15 Hz: 3.5 mm, 46.15 Hz to 2000 Hz 3 axes 10 sweeps each, criterion B 30 g

Protection Class (DIN-EN 60529) (Sensors)

 N/A Ingress Protection (IP40)

Material

 N/A 1.4104 (Magnetic)
Approximate Weight (Sensors)7 N/A Model CSHA2FL-CRa15 - 360 gModel CSHA2FL-CRa5 - 130 g

Compatibility (Sensors)

 N/A Compatible with capacitive controllers of DT61x4 series from Micro-Epsilon

Characteristics

Characteristics

 N/A
  • Ideal for long signal transmission paths up to 15 m
  • Robust sensor cable for use on trailing chains and robots
  • Easy integration due to flexible cable routing
  • Highest signal stability even with sensor cable in motion
  • RS485 interface or analog output

Additional Information

Additional Information

 N/A The capaNCDT DT61x4 is an active, capacitive system for displacement, distance and position measurement in industrial applications. Consisting of a sensor with integrated preamplifier, a robust cable and a compact controller, the innovative measuring system is immediately ready for use without any on-site calibration. The integrated preamplifier allows the sensor to bridge long signal transmission paths while maintaining high signal stability.

With cable lengths up to 15 m, the capaNCDT 61x4 is used in the fields of automation, robot manufacturing and drag chain tasks. Moreover, the capaNCDT 61x4 is also suitable for machine building and semiconductor applications. For optimum signal quality, the desired cable length is already factory-calibrated. The active flat sensor is designed with a ceramic sensor element and impresses by its compact and robust design.
  • 1 Valid only for controller. The channel’s total linearity consists of the values for controller and sensor
  • 2 Adjustable
  • 3 Short-Circuit-Proof
  • 4 Referred to nominal measuring range
  • 5 Sensor linearity must be added to controller linearity
  • 6 With recommended mounting option
  • 7 Including Cable