COMPANY HEADER
Print Back
The new capaNCDT 61x0/IP capacitive measuring system is specially designed for industrial measurement tasks where high precision is required. It detects parameters such as displacement, distance, deflection, expansion, and deformation of conductive targets. The capaNCDT 61x0/IP includes a sensor, sensor cable and controller. Calibrated at the factory, the system is immediately ready for use with no on site calibration necessary. Even after replacing the sensors, no recalibration is required. Data output is via current, voltage or digital RS485 interface. Classified to IP68, it is ideally suited to industrial measurement applications. Its aluminum die-cast housing protects the controller from dust and humidity. As the sensor cable is extremely robust, it provides resistance to treading and high temperatures. Designed for large distances, the cable can be used up to 8 m.
Unit of Measure

Specifications

Sensor Cable Length

 N/A Up to 8 m

Static Resolution at 2 Hertz (Hz) Full Scale Output (FSO)

 N/A 0.01 %

Dynamic Resolution at 1 Kilohertz (kHz) Full Scale Output (FSO)

 N/A 0.02 %

Frequency Response at -3 Decibel (dB)

 N/A 1 kHz

Linearity Full Scale Output (FSO)

 N/A ≤±0.1 %
Temperature Stability1 N/A 50 ppm/K

Sensitivity Full Scale Output (FSO)

 N/A ≤±0.1 %

Long-Term Stability Full Scale Output (FSO)

 N/A ±0.02 %/month

Synchronization

 N/A No

Direct Current (DC) Supply Voltage

 N/A 9 to 28 V

Power Consumption

 N/A 1.4 W
Analog Output Voltage2 N/A 0 to 10 V
Analog Output Voltage Tolerance (±)3 N/A 5 V

Sensor Connection

 N/A Type B Socket; IP68

Supply and Output Connection

 N/A 6-Pin Socket; IP68

Operation Temperature Range

 N/A -20 to 60 ºC

Storage Temperature Range

 N/A -20 to 75 ºC

Shock (DIN-EN 60068-2-29)

 N/A 20 g / half-sine 5 ms in XYZ Axes / 1000 Shocks Per Axis

Vibration (DIN-EN 60068-2-6)

 N/A 10 g / 10, 2000 Hz in XYZ axes / 10 cycles per axis

Protection Class (DIN-EN 60529)

 N/A Ingress Protection (IP68)

Material

 N/A Die-Cast Aluminum

Weight

 N/A 165 g

Additional Information

Additional Information

 N/A The capaNCDT 61x0/IP is an industrial-grade, capacitive measuring system for inline quality assurance and for plant and machinery control. This precise sensor system consists of a sensor, a sensor cable and a controller, which are ready for use without any on-site calibration. The sensor system detects parameters such as distance, deflection, expansion, displacement and deformation on conductive targets. Very good temperature stability, insensitivity to magnetic fields and a robust design make the capaNCDT 61x0/IP ideally suitable for measurement tasks in industrial environments.

Robust sensor cable
  • Temperature resistant
  • Tread-proof
Industrial controller
  • Compact aluminum die-cast housing
  • Dust-proof and watertight (IP68)
  • Industrial outputs: current, voltage, RS485
Wide sensor range
  • Robust & temperature resistant
  • Exchangeable without recalibration
  • Models: flat/cylinder/thread

Features

Features

 N/A
  • Compact and robust controller
  • Complete sensor portfolio including 15 models
  • IP68 for harsh environments
  • Replacing sensor and controller without recalibration
  • Triaxial design for stable measurement results
  • 1 Valid with +10 ºC to +40 ºC, 100 ppm FSO/K with -20 ºC ... +10 ºC, or with +40 ºC ... +60 ºC
  • 2 Short Circuit Proof
  • 3 Short Circuit Proof