Article Number |
N/A 7112013.01 |
Repeatability |
N/A <3 mm |
Resolution |
N/A 1 mm |
Linearity |
N/A <±20 mm |
Note for Linearity |
N/A Statistical spread of 95% over the entire measuring range. |
Measurement Frequency |
N/A 100 Hz |
Light Source - Semiconductor Laser Wavelength |
N/A 660 nm |
Light Source Color |
N/A Red |
Laser Safety Class |
N/A EN 60825-1:2007 Class 1 |
Divergence |
N/A <1.5 millirads |
Permissible Ambient Light |
N/A 50,000 lux |
Operating Temperature |
N/A -30 to 55 ºC |
Note for Operation Temperature |
N/A When crossing 0 ºC additional heating may be required. |
Non-Condensing Relative Humidity |
N/A 5 to 95 % |
Storage Temperature |
N/A -30 to 70 ºC |
Switching Output |
N/A Q1/Q2 Push-Pull Outputs |
Maximum Direct Current (DC) Switching Voltage |
N/A 30 V |
Maximum Switching Current |
N/A 100 mA |
Analog Output Current |
N/A 4 to 20 mA |
Digital to Analog (DA) Output |
N/A 12 bits |
Analog Output |
N/A Short-Circuit/Overload Protected |
Temperature Stability |
N/A ≤0.25 mm/ºC |
Direct Current (DC) Power Supply |
N/A 10 to 30 V |
Power Supply Class |
N/A Class 2 |
Connection |
N/A 4-Pin, M12 |
Protection Class |
N/A Ingress Protection (IP67) |
Housing Material |
N/A Acrylonitrile Butadiene Styrene (ABS) Plastics |
Window Material |
N/A Plastic Pane |
Weight |
N/A 90 g |
Electromagnetic Compatibility (EMC) Requirements |
N/A Complies with 2014/30/EU |
Laser Power |
N/A <1 mW |
Measuring Range (Black) |
N/A 0.2 to 5 m |
Measuring Range (Gray) |
N/A 0.2 to 6 m |
Measuring Range (White) |
N/A 0.2 to 15 m |
Color |
N/A Black 10 %Gray 18 %White 90 % |
Note for Measuring Range |
N/A Depending on target reflectance, ambient light influences and atmospheric conditions. |
Software |
N/A
Free setup and configuration software The scope of supply includes software for easy sensor configuration. The settings can be implemented conveniently via a Windows user interface on the PC. The sensor parameters are transmitted to the sensor via the serial port and can also be saved if required. The software also contains a module which can display and store the measurement results. The sensor is connected to the PC via the sensor cable using a USB converter. |
Application |
N/A
Position measurement on gantry cranes Gantry cranes require multiple measurement tasks: Positioning of the trolley, detection and dimensioning of containers and monitoring of the minimum clearance between the cranes. Filling level measurement in silos Depending on the required accuracy, laser distance sensors determine the filling level of silos at up to four points. Based on these distances, the filling level is calculated. Acquisition of coil diameters The quantity of steel wound on and off is monitored via the acquisition of coil diameters using laser probes. |
Characteristics |
N/A
|
Additional Information |
N/A The ILR103x/LC1 laser distance sensors operate according to the time-of-flight technology. Based on this technology, these sensors provide accurate, reliable and unambiguous as well as reproducible measurement results regardless of ambient conditions such as surface properties, dark colors or ambient light. The sensors use a measuring laser with laser class 1. |