Article Number |
N/A 7112015 |
Measuring Rate |
N/A 20 Hz |
Repeatability |
N/A <300 µm |
Note for Repeatability |
N/A Measurement frequency of 20 Hz, moving average 10 |
Resolution |
N/A 0.1 mm |
Linearity |
N/A <±1 mm |
Note for Linearity |
N/A Measured in the range of 0.05 to 20 m; statistical spread 2s |
Temperature Compensation Range |
N/A -10 to 50 ºC |
Light Source - Semiconductor Laser Wavelength |
N/A 655 nm<1 mW |
Light Source Color |
N/A Red |
Laser Safety Class |
N/A Class 2 in Accordance with DIN-EN 60825-1 : 2015-07 |
Permissible Ambient Light |
N/A 50,000 lux |
Variable Capacitance Diode (VCD) Supply Voltage |
N/A 10 to 30 V |
Power Consumption at 24 Volts (V) Direct Current (DC) Voltage |
N/A <1.5 W |
Signal Input |
N/A Trigger |
Digital Interface1 | N/A RS422/Universal Serial Bus (USB) |
Switching Output |
N/A Q1/Q2/Q3 (Configurable) |
Analog Output Current |
N/A 4 to 20 mA |
Digital to Analog (DA) Output |
N/A 16 bits |
Analog Output |
N/A Freely Scalable within the Measuring Range |
Supply Connection |
N/A M16 Screw |
Signal Connection |
N/A Plug Connection 12-pin |
Mounting |
N/A Screw connection and adjustment on sensor bottom plate |
Non-Condensing Storage Temperature |
N/A -25 to 70 ºC |
Non-Condensing Operating Temperature |
N/A -10 to 50 ºC |
Shock (DIN-EN 60068-2-27) |
N/A 6 ms in 3 axes, in Three Directions, 1000 Shocks each 15 g |
Vibration (DIN-EN 60068-2-6) |
N/A 10 to 500 Hz in 3 axes, 10 Cycles Each 15 g |
Protection Class (DIN-EN 60529) |
N/A Ingress Protection (IP65) |
Housing Material |
N/A Aluminum |
Approximate Weight |
N/A 300 g |
Control and Display Element |
N/A 5x LEDs for power, signal strength and switching outputs |
Measuring Range (Black) |
N/A 0.05 to 30 m |
Measuring Range (Gray) |
N/A 0.05 to 70 m |
Measuring Range (White) |
N/A 0.05 to 100 m |
Measuring Range (Reflector Film)2 | N/A 35 to 150 m |
Color |
N/A Black 6 %Gray 40 %White 80 % |
Note for Measuring Range |
N/A Depending on target reflectance, ambient light influences and atmospheric conditions. |
Note for Measuring Range (Reflector Film) |
N/A ILR-RF210 reflector film 210 x 297 mm, art. 7966058 |
Characteristics |
N/A
|
Additional Information |
N/A
With the optoNCDT ILR2250-100, Micro-Epsilon presents a new powerful laser distance sensor. The sensor is designed for operation with or without reflector film, which is used depending on the distance and ambient conditions. The sensor measures large distances up to 100 m without contact and provides best results even on challenging (dark, structured or weakly reflecting) surfaces. The measuring range can be extended up to 150 m by attaching a reflector film to the measuring object. Thanks to the integrated AUTO measurement mode, precise and reliable measurements can be made even on dark, partially reflecting and distant targets. A simple and fast alignment of the sensor is made possible by the integrated mounting plate with 4 threaded pins. The ILR2250-100 laser distance sensors provide reliable results even under harsh conditions. They are protected against dust and splashes of water thanks to the robust design in an IP65 certified die-cast aluminum housing. Compact size combined with low weight opens up new fields of application particularly in factory and plant automation, as well as in drone applications for distance measurement from the air. |