COMPANY HEADER
Print Back
The optoNCDT 1320 is a new laser triangulation sensor with compact size. This series provides the ideal entry-level sensor for precise measurement of displacement, distance and position. The controller is integrated in the housing which considerably simplifies the installation procedure. Due to its extremely compact size, the sensor can also be integrated into restricted installation space. Due to its low weight, the optoNCDT 1320 is ideally suitable for applications where high accelerations occur e.g. on the robot arm or in pick-and-place machines.
Unit of Measure

Specifications

Measuring Range

 N/A 10 mm25 mm50 mm

Start of Measuring Range (SMR)

 N/A 20 mm25 mm35 mm

Midrange Measuring Range (MMR)

 N/A 25 mm37.5 mm60 mm

End of Measuring Range (EMR)

 N/A 30 mm50 mm85 mm

Linearity (0.12% Full Scale Output (FSO))

 N/A 12 µm30 µm60 µm

Reproducibility

 N/A 1 µm2.5 µm5 µm

Measuring Rate

 N/A 0.25 kHz0.5 kHz1 kHz2 kHz

Light Source

 N/A Semiconductor Laser

Laser Power

 N/A < 1 mW

Laser Wavelength

 N/A 670 nm

Permissible Ambient Light

 N/A 10,000 lux

Spot Diameter at Start of Measuring Range (SMR)

 N/A 100 x 140 µm90 x 120 µm

Spot Diameter at Midrange Measuring Range (MMR)

N/A 120 x 130 µm230 x 240 µm45 x 40 µm

Spot Diameter at End of Measuring Range (EMR)

 N/A 140 x 160 µm390 x 500 µm630 x 820 µm

Smallest Spot Diameter with 24 Millimeter (mm)

 N/A 45 x 40 µm

Smallest Spot Diameter with 31 Millimeter (mm)

 N/A 55 x 50 µm

Smallest Spot Diameter with 42 Millimeter (mm)

 N/A 70 x 65 µm

Spot Diameter Tolerance (±)

 N/A 10 %

Protection Class

 N/A Ingress Protection (IP65)

Laser Safety Class

 N/A Class 2 IEC 60825-1 : 2008-05

Temperature Stability Full Scale Output (FSO)

 N/A ±0.03 %/°C

Non-Condensing Operating Temperature

 N/A 0 to +50 ºC

Non-Condensing Storage Temperature

 N/A -20 to +70 ºC

Control Input/Output (I/O)

 N/A 1x HTL Laser on/off 1x HTL Multi-function input: Trigger In/zero-setting/mastering/teach in (1x Error Output npn, pnp, push pull)
Analog Output Current1 N/A 4 to 20 mA

Interface Mode for Digital Output

 N/A RS422

Maximum Digital Output Modulation

N/A 921.6 kBaud

Signal Processing

 N/A 14 bits

Approximate Weight without Cable

 N/A 30 g

Approximate Weight with 3 Meter (m) Cable

 N/A 145 g

Light Emitting Diode (LED)

 N/A 2 x 3 Color LEDs for Power and Status

Button Operation

 N/A Select Button for Zero/Teach in/Reset/Factory Setting

Web Interface Operation

 N/A Selectable Presets

Integrated Open End Sensor Cable Length

 N/A 3 m

Controller Model

 N/A Integrated Signal Processor

Electromagnetic Compatibility (EMC) Requirements

 N/A EN 61 000-6-2/DIN EN 61326-1 EN 61 000-6-3/DIN EN 61326-1 (Class B)

Vibration

Vibration Frequency Range

 N/A 20 to 500 Hz

Vibration Amplitude

 N/A 2 g.

Note for Vibration

 N/A According to IEC 60068-2-6

Shock

Shock Amplitude

 N/A 15 g.

Shock Duration

 N/A 6 ms

Number of Shock Applied Axes

 N/A 3

Note for Shock

 N/A According to IEC 60068-2-29

Power Supply

Direct Current (DC) Voltage Range

 N/A 11 to 30 V

Alternating Current (AC) Voltage

 N/A 24 V

Power

 N/A < 2 W

Features

N/A

  • Ideal for Serial and OEM Applications
  • Compact Design with Integrated Controller
  • Measuring Rate up to 2 kHz
  • Analog and Digital Output
  • Trigger Input and Teach-In
  • Plug & Play via Select Button
  • Application-Specific Presets for Fast Sensor Settings
  • Auto Target Compensation

Additional Information

N/A The optoNCDT 1320 offers high accuracy and adjustable measuring rates up to 2 kHz. The Auto Target Compensation (ATC) provides stable distance signal control regardless of target color or brightness. Very small objects can be detected reliably due to the small and sharply projected measurement spot size.

A Newly Defined Class of its Own

N/A The combination of speed, size, performance and application variety defines a new class of laser sensors. The worldwide unique SMART sensor concept combines an integrated web interface with a compact sensor size. The excellent price/performance ratio enables new areas of use, especially for high volume applications in machine integration and factory automation.

With the compact Micro-Epsilon sensors, new application possibilities open up in precisely those areas where conventional laser sensors often perform at their limits.

Plug and Play Due to Unique Ease of Use

N/A The optoNCDT 1320 models enable quick sensor commissioning with just a few clicks using the multifunction sensor button. Therefore, the user has the possibility to use the zero setting/mastering function or the trigger set up. An intuitive web interface enables the user to carry out extended sensor settings. The settings for the most common surface types can be selected using presets. Using the 'Standard‘, 'Changing surfaces‘ and 'Material with penetration‘ settings, precise measurement results are easily achieved without any complex optimization.

The quality slider enables the sensor to be adapted to static and dynamic processes.

  • 1 Free scalable within the Nominal Range