Measuring Range |
N/A 10 mm |
Start of Measuring Range (SMR) |
N/A 20 mm |
Midrange Measuring Range (MMR) |
N/A 25 mm |
End of Measuring Range (EMR) |
N/A 30 mm |
| Linearity1 | N/A 8 to 10 µm |
| Linearity Full Scale Output (FSO)2 | N/A ≤±0.08 to ±0.1 % |
| Repeatability3 | N/A 0.5 µm |
| Measuring Rate4 | N/A 0.25 kHz0.5 kHz1 kHz2 kHz4 kHz |
Light Source |
N/A Semiconductor Laser |
Laser Power |
N/A < 0.39 mW |
Laser Wavelength |
N/A 670 nm |
Laser Color |
N/A Red |
Laser Safety Class |
N/A Class 1 in Accordance with DIN EN 60825-1 : 2015-07 |
Permissible Ambient Light |
N/A 10,000 lux |
Spot Diameter Tolerance (±) |
N/A 10 % |
Spot Diameter at Start of Measuring Range (SMR) |
N/A 90 x 120 µm |
Spot Diameter at End of Measuring Range (EMR) |
N/A 140 x 160 µm |
Spot Diameter at Midrange Measuring Range (MMR) |
N/A 45 x 40 µm |
Smallest Spot Diameter with 24 Millimeter (mm) |
N/A 45 x 40 µm |
Protection Class |
N/A Ingress Protection (IP65) |
Temperature Stability Full Scale Output (FSO) |
N/A ±0.03 %/°C |
Non-Condensing Operating Temperature |
N/A 0 to +50 ºC |
Non-Condensing Storage Temperature |
N/A -20 to +70 ºC |
Control Input/Output (I/O) |
N/A 1x HTL Laser on/off 1x HTL Multifunction Input Trigger in Mastering Teach (1x Error output npn, pnp, Push Pull) Zero Setting |
Note for Shock |
N/A According to IEC 60068-2-29 |
Approximate Weight with 3 Meter (m) Cable |
N/A 145 g |
Approximate Weight with Pigtail |
N/A 60 g |
Displays |
N/A 2 x 3 color Light Emitting Diode) LEDs for power and status |
Button Operation |
N/A Select Button for Zero/Teach/Factory Settings |
Web Interface Operation |
N/A Application-Specific Presets Data Reduction Freely Selectable Averaging Possibilities Peak Selection, Video Signal Setup Management (Connection to PC via IF2001/USB (Optionally Available) |
Note for Operation |
N/A Connection to PC via IF2001/USB (optionally available) |
Integrated Open End Sensor Cable Length |
N/A 3 m |
Electronics |
N/A Integrated Signal Processor |
Electromagnetic Compatibility (EMC) Requirements |
N/A EN 61 000-6-2/DIN EN 61326-1 EN 61 000-6-3/DIN EN 61326-1 (Class B) |
Intended Application |
N/A Displacement Triangulation |
Output Types |
N/A LED/LCD Display |
Industry Focus |
N/A Automotive Medical and Dental Pharmaceutical |
Sensor/ Detector/Transducer Type |
N/A Laser |
Analog Output Current at 1 to 5 V with Cable PC 1420-3/U |
N/A 4 to 20 mA |
Analog Resolution |
N/A 12 bits |
Interface Mode for Digital Output |
N/A RS422 |
Digital Resolution |
N/A 16 bits |
Note for Analog Measurement Value Output |
N/A Freely scalable within the measuring range (The d/a conversion is executed with 12 Bit) |
Vibration Amplitude |
N/A 20 g. |
Vibration Frequency Range |
N/A 20 to 500 Hz |
Note for Vibration |
N/A According to IEC 60068-2-6 |
Direct Current (DC) Power Supply |
N/A 11 to 30 V |
Power Supply for 24 Volt (V) Voltage |
N/A <2 W |
Additional Information |
N/A
Use in automotive production Particularly in the field of automotive production, increased demands are being placed on manufacturers to take adequate safety precautions in their production plants, including the use of laser class 1 sensors if people are working in close proximity to laser sensors. For example, this is the case when handling equipment for the attachment or installation of interior parts is used while laser sensors precisely align these parts Use in pharmaceutical and medical engineering In medical engineering, laser sensors are often used to determine distances to very sensitive surfaces. Laser class 2 sensors can under certain circumstances cause a chemical or thermal reaction of the surface. Here, optoNCDT 1420 CL1 sensors use only about one third of the energy of a laser class 2 sensor due to their reduced laser power of max. 390 µW. This enables measurements of even sensitive materials such as substrates without causing any alterations of the target material. |
Features |
N/A
Ideal for serial and OEM applications Laser class 1 Compact design with integrated controller Analog and digital output Trigger input / teach-in zero-setting / mastering Configuration via web interface or Plug & Play Auto Target Compensation |
Accessories |
N/A
Power supply PS 2020 (power supply 24 V / 2.5 A, input 100 - 240 VAC, output 24 VDC / 2.5 A, mounting onto symmetrical standard rail 35 mm x 7.5 mm, DIN 50022) Controller unit for evaluation and signal conversion CSP 2008 (controller for multiple signal processing; analog and digital interfaces) Controller unit for evaluation and signal conversion C-Box/2A (controller for conversion and evaluation of up to two sensor signals) Interface card I F2008 (interface card for multiple signal processing; analog and digital interfaces) USB converter F2001/USB RS422/USB Converter (converter for digital signals in USB) USB converter IF2004/USB 4 channels RS422/USB Converter (converter, up to 4 digital signals in USB) |
Accessories for optoNCDT 1320/1420/1402CL1 |
N/A
Supply and output cable, drag-chain suitable Item # - PCF1420-1/I(01) Item Description - 1 m, output 4 to 20 mA Item # - PCF1420-3/I Item Description - 1 m, output 4 to 20 mA Item # - PCF1420-6/I Item Description - 3 m, output 4 to 20 mA Item # - PCF1420-10/I Item Description - 6 m, output 4 to 20 mA Item # - PCF1420-15/I Item Description - 10 m, output 4 to 20 mA Item # - PCF1420-3/U Item Description - 15 m, output 4 to 20 mA Item # - PCF1420-6/U Item Description - 3 m, with integrated resistor, output 1 to 5 VDC Item # - PCF1420-10/U Item Description - 6 m, with integrated resistor, output 1 to 5 VDC Item # - PCF1420-15/U Item Description - 10 m, with integrated resistor, output 1 to 5 VDC Item # - PCF1420-3/IF2008 Item Description - 15 m, with integrated resistor, output 1 to 5 VDC Item # - PC1420-6/IF2008 Item Description - 3 m, interface and supply cable Item # - PCF1420-10/IF2008 Item Description - 6 m, supply and output cable Item # - PC 1402-3/CSP Item Description - 10 m, interface and supply cable Item Description - 3 m, connection cable for CSP 2008, only for optoNCDT 1420) Note - on request with output 2 to 10 VDC Supply and output cable, suitable for use with robots (available in 90º version) Item # - PCR 1402-3/I Item Description - 3 m Item # - PCR 1402-6/I Item Description - 6 m Item # - PCR 1402-8/I Item Description - 8 m |
Accessories for optoNCDT 1610/1630 |
N/A
Supply and output cable Item # - PC 1605-3 Item Description - 3 m Item # - PC 1605-6 Item Description - 6 m Item # - PC 1607-5/BNC Item Description - 5 m, BNC connector |
Accessories for optoNCDT 1700/1700LL/1700BL |
N/A
Supply and output cable (drag-chain suitable) Item # - PC 1700-3 Item Description - 3 m Item # - PC 1700-10 Item Description - 10 m Item # - PC 1700-10/IF2008 Item Description - 10 m, for use with interface card IF2008 Item # - PC 1700-3/T Item Description - 3 m, for use with trigger box Item # -PC 1700-10/T Item Description - 10 m, for use with trigger box Item # -PC 1700-3/USB Item Description - 3 m, with USB-RS422-converter, power supply 90 to 230 VAC Supply and output cable (suitable for use with robots) Item # - PCR 1700-5 Item Description - 5 m Item # - PCR 1700-10 Item Description - 10 m Supply and output cables for temperatures up to 200ºC Item # - PC1700-3/OE/HT Item Description - 3 m Item # - PC1700-6/OE/HT Item Description - 6 m Item # - PC1700-15/OE/HT Item Description - 15 m Protection housing Item # - SGHF (with air-purge collar) Item Description - sizes S and M Item Description - SGH (without air-purge collar) Item Description - sizes S and M Item # - SGHF-HT(with water cooling) |