COMPANY HEADER
Print Back
scanCONTROL 30x2 laser scanners are powerful profile sensors in terms of size, accuracy and measuring rate. These laser scanners provide calibrated 2D profile data with up to 5.12 million points per second. With a maximum profile frequency of 5 kHz, the scanners are designed for precise profile measurements in dynamic processes. The sensor matrix offers a resolution of 1,024 points with a point distance from 24 µm. This means that even small details can be detected reliably.
Unit of Measure

Specifications

Laser Color

 N/A Blue Red

Start of Measuring Range - (Z-Axis (Height))

 N/A 77.5 mm

Mid of Measuring Range - (Z-Axis (Height))

 N/A 85 mm

End of Measuring Range - (Z-Axis (Height))

 N/A 92.5 mm

Height of Measuring Range - (Z-Axis (Height))

 N/A 15 mm

Maximum Deviation of A Single Point for Red Laser Scanner (2 Sigma) - (Z Axis (Height)) (±)

 N/A 0.09 %

Maximum Deviation of A Single Point for Blue Laser Scanner (2 Sigma) - (Z Axis (Height)) (±)

 N/A 0.08 %

Note for Maximum Deviation of A Single Point (2 Sigma) - (Z Axis (Height))

 N/A According to measuring range; Measuring object: Micro-Epsilon standard object

Line Linearity - (Z Axis (Height))

 N/A 2 µm

Line Linearity - (Z Axis (Height)) Tolerance (±)

 N/A 0.013 %

Note for Line Linearity - (Z Axis (Height))

 N/A According to measuring range; Measuring object: Micro-Epsilon standard object

According to a one-time averaging over the width of the measuring field (1,024 points)

Start of Measuring Range - (X-Axis (Length))

 N/A 23 mm

Mid of Measuring Range - (X-Axis (Length))

 N/A 25 mm

End of Measuring Range - (X-Axis (Length))

 N/A 26.8 mm

Resolution - (X-Axis (Length))

 N/A 1,024 points/profile

Standard Profile Frequency

 N/A Up to 5,000 Hz

Note for RS422 (Half-Duplex) Interfaces

 N/A RS422 interface, programmable either as serial interface or as input for triggering/synchronization

Output of Measurement Values

 N/A EtherCAT (Only with 2D/3D Gateway) Ethernet (UDP / Modbus TCP) EtherNet/IP (Only with 2D/3D Gateway) PROFINET (Only with 2D/3D Gateway) RS422 (ASCII / Modbus RTU) Analog (Only with 2D/3D Output Unit) Switch Signal (Only with 2D/3D Output Unit)

Control and Display Element

 N/A 3 x color LEDs for laser, data and error

Aperture Angle of Laser Line

 N/A 23 º

Laser Switch-Off

 N/A Via Software, Hardware Switch-Off with SI Option

Permissible Ambient Light (Fluorescent Light)

 N/A 10,000 lux

Protection Class (DIN-EN 60529)

 N/A Ingress Protection (IP67) (When Connected)

Vibration (DIN-EN 60068-2-27)

 N/A 2 g20 to 500 Hz

Shock (DIN-EN 60068-2-6)

 N/A 15 g6 ms

Sensor Weight without Cable

 N/A 415 g

Interfaces

Ethernet GigE Vision

 N/A Output of Measurement Values Profile Data Transmission Sensor Control

Digital Inputs

 N/A Encoder (Counter) Mode Switching Trigger

RS422 (Half-Duplex) Interfaces

 N/A Output of Measurement Values Sensor Control Synchronization Trigger

Light Source

Standard Light Source for Red Laser

 N/A ≤10 mW

Optional Light Source for Red Laser

 N/A ≤30 mW

Standard Light Source for Blue Laser

 N/A ≤10 mW

Standard Laser Class for Red Laser

 N/A 2M

Optional Laser Class for Red Laser

 N/A 3R

Standard Laser Class for Blue Laser

 N/A 2M

Light Source - Semiconductor Laser Wavelength for Red Laser

 N/A 658 nm

Light Source - Semiconductor Laser Wavelength for Blue Laser

 N/A 405 nm

Temperature Range

Operating Temperature

 N/A 0 to 45 ºC

Storage Temperature

 N/A -20 to 70 ºC

Supply Voltage

Direct Current (DC) Supply Voltage

 N/A 11 to 30 V

Nominal Value Supply Voltage

 N/A 24 V

Nominal Value Supply Current

 N/A 500 mA

Supply

 N/A Institute of Electrical and Electronics Engineers (IEEE) 802.3af class 2, Power over Ethernet (PoE)

Characteristics

Characteristics

 N/A
  • Measuring range z-axis up to 300 mm
  • Measuring range x-axis up to 290 mm
  • Measurement speed up to 5 kHz
  • Measuring rate up to 5,120,000 points/sec
  • Line linearity z-axis from 2 µm
  • Resolution x-axis up to 1,024 points
  • Available also with blue laser

Additional Information

Additional Information

 N/A Large measuring range with 200 mm
The scanCONTROL 30x2 laser scanners are now also available with a large measuring field of 200 x 300 mm. This allows large measuring objects to be detected with high accuracy.

Precise 2D/3D profile measurements
The new LLT30x2 laser profile scanners provide calibrated profile data with up to 5.12 million points per second. They allow profile frequencies up to 5 kHz and resolutions up to 1,024 points. Thanks to their high accuracy and versatility, the scanners are particularly suitable for static and dynamic applications as well as robotic applications. They measure and evaluate, e. g., angles, steps, gaps, distances, and circles.

Available as COMPACT and SMART versions
The scanCONTROL 30x2 series is available as COMPACT and SMART versions. The COMPACT scanners provide calibrated profile data that can be further processed on a PC with software evaluation provided by the customer. SMART scanners operate autonomously and provide selected measurement values. The scanCONTROL 30x2 series supports all SMART functions and programs that are set in the scanCONTROL Configuration Tools software and directly stored in the internal controller.

The easy way of machine integration
The design of the LLT30x2 series is compact and lightweight. The controller is integrated in the sensor itself, which simplifies mechanical integration. The measurement data can be output directly.