COMPANY HEADER
Request Information
Laser distance sensors optoNCDT ILR103x/LC1 are designed for fast displacement measurement between 0.2 and 15 m or rather up to 50 m with reflector. The fast response time of 10 ms is typical for this series. With buttons at the quite small housing a Teach-In or the assignment of switching points can be done quickly. Tasks of this sensors are fill level measurement, positioning or length measurements.
Unit of Measure

Specifications

Article Number

N/A 7112012.01

Repeatability

N/A <3 mm

Resolution

N/A 1 mm

Linearity

N/A <±20 mm

Note for Linearity

N/A Statistical spread of 95% over the entire measuring range.

Measurement Frequency

N/A 100 Hz

Light Source - Semiconductor Laser Wavelength

N/A 660 nm

Light Source Color

N/A Red

Laser Safety Class

N/A EN 60825-1:2007 Class 1

Divergence

N/A <1.5 millirads

Permissible Ambient Light

N/A 50,000 lux

Operating Temperature

N/A -30 to 55 ºC

Note for Operation Temperature

N/A When crossing 0 ºC additional heating may be required.

Non-Condensing Relative Humidity

N/A 5 to 95 %

Storage Temperature

N/A -30 to 70 ºC

Switching Output

N/A Q1/Q2 Push-Pull Outputs

Maximum Direct Current (DC) Switching Voltage

N/A 30 V

Maximum Switching Current

N/A 100 mA

Analog Output Current

N/A 4 to 20 mA

Digital to Analog (DA) Output

N/A 12 bits

Analog Output

N/A Short-Circuit/Overload Protected

Temperature Stability

N/A ≤0.25 mm/ºC

Direct Current (DC) Power Supply

N/A 10 to 30 V

Power Supply Class

N/A Class 2

Connection

N/A 4-Pin, M12

Protection Class

N/A Ingress Protection (IP67)

Housing Material

N/A Acrylonitrile Butadiene Styrene (ABS) Plastics

Window Material

N/A Plastic Pane

Weight

N/A 90 g

Electromagnetic Compatibility (EMC) Requirements

N/A Complies with 2014/30/EU

Laser Power

N/A <1 mW

Measuring Range

Measuring Range (Reflector Film)1 N/A 0.2 to 50 m

Note for Measuring Range

N/A Depending on target reflectance, ambient light influences and atmospheric conditions.

Software

Software

N/A Free setup and configuration software
The scope of supply includes software for easy sensor configuration. The settings can be implemented conveniently via a Windows user interface on the PC. The sensor parameters are transmitted to the sensor via the serial port and can also be saved if required. The software also contains a module which can display and store the measurement results. The sensor is connected to the PC via the sensor cable using a USB converter.

Application

Application

N/A Position measurement on gantry cranes
Gantry cranes require multiple measurement tasks: Positioning of the trolley, detection and dimensioning of containers and monitoring of the minimum clearance between the cranes.

Filling level measurement in silos
Depending on the required accuracy, laser distance sensors determine the filling level of silos at up to four points. Based on these distances, the filling level is calculated.

Acquisition of coil diameters
The quantity of steel wound on and off is monitored via the acquisition of coil diameters using laser probes.

Characteristics

Characteristics

N/A
  • Measuring range up to 15 m onto diffuse reflecting surfaces, 50 m onto reflector
  • Fast response time
  • Compact design
  • Excellent price/performance ratio

Additional Information

Additional Information

N/A The ILR103x/LC1 laser distance sensors operate according to the time-of-flight technology. Based on this technology, these sensors provide accurate, reliable and unambiguous as well as reproducible measurement results regardless of ambient conditions such as surface properties, dark colors or ambient light. The sensors use a measuring laser with laser class 1.

Note

Note

N/A The ILR103x/LC1 sensors use a semiconductor laser of class 1.
Laser class 1 devices require no special safety precautions.
  • 1 ILR-RF250