Measuring Range |
N/A 10 mm25 mm50 mm |
Start of Measuring Range (SMR) |
N/A 20 mm25 mm35 mm |
Midrange Measuring Range (MMR) |
N/A 25 mm37.5 mm60 mm |
End of Measuring Range (EMR) |
N/A 30 mm50 mm85 mm |
Linearity (0.12% Full Scale Output (FSO)) |
N/A 12 µm30 µm60 µm |
Reproducibility |
N/A 1 µm2.5 µm5 µm |
Measuring Rate |
N/A 0.25 kHz0.5 kHz1 kHz2 kHz |
Light Source |
N/A Semiconductor Laser |
Laser Power |
N/A < 1 mW |
Laser Wavelength |
N/A 670 nm |
Permissible Ambient Light |
N/A 10,000 lux |
Spot Diameter at Start of Measuring Range (SMR) |
N/A 100 x 140 µm90 x 120 µm |
Spot Diameter at Midrange Measuring Range (MMR) |
N/A 120 x 130 µm230 x 240 µm45 x 40 µm |
Spot Diameter at End of Measuring Range (EMR) |
N/A 140 x 160 µm390 x 500 µm630 x 820 µm |
Smallest Spot Diameter with 24 Millimeter (mm) |
N/A 45 x 40 µm |
Smallest Spot Diameter with 31 Millimeter (mm) |
N/A 55 x 50 µm |
Smallest Spot Diameter with 42 Millimeter (mm) |
N/A 70 x 65 µm |
Spot Diameter Tolerance (±) |
N/A 10 % |
Protection Class |
N/A Ingress Protection (IP65) |
Laser Safety Class |
N/A Class 2 IEC 60825-1 : 2008-05 |
Temperature Stability Full Scale Output (FSO) |
N/A ±0.03 %/°C |
Non-Condensing Operating Temperature |
N/A 0 to +50 ºC |
Non-Condensing Storage Temperature |
N/A -20 to +70 ºC |
Control Input/Output (I/O) |
N/A 1x HTL Laser on/off 1x HTL Multi-function input: Trigger In/zero-setting/mastering/teach in (1x Error Output npn, pnp, push pull) |
Analog Output Current1 | N/A 4 to 20 mA |
Interface Mode for Digital Output |
N/A RS422 |
Maximum Digital Output Modulation |
N/A 921.6 kBaud |
Signal Processing |
N/A 14 bits |
Approximate Weight without Cable |
N/A 30 g |
Approximate Weight with 3 Meter (m) Cable |
N/A 145 g |
Light Emitting Diode (LED) |
N/A 2 x 3 Color LEDs for Power and Status |
Button Operation |
N/A Select Button for Zero/Teach in/Reset/Factory Setting |
Web Interface Operation |
N/A Selectable Presets |
Integrated Open End Sensor Cable Length |
N/A 3 m |
Controller Model |
N/A Integrated Signal Processor |
Electromagnetic Compatibility (EMC) Requirements |
N/A EN 61 000-6-2/DIN EN 61326-1 EN 61 000-6-3/DIN EN 61326-1 (Class B) |
Vibration Frequency Range |
N/A 20 to 500 Hz |
Vibration Amplitude |
N/A 2 g. |
Note for Vibration |
N/A According to IEC 60068-2-6 |
Shock Amplitude |
N/A 15 g. |
Shock Duration |
N/A 6 ms |
Number of Shock Applied Axes |
N/A 3 |
Note for Shock |
N/A According to IEC 60068-2-29 |
Direct Current (DC) Voltage Range |
N/A 11 to 30 V |
Alternating Current (AC) Voltage |
N/A 24 V |
Power |
N/A < 2 W |
N/A
|
N/A The optoNCDT 1320 offers high accuracy and adjustable measuring rates up to 2 kHz. The Auto Target Compensation (ATC) provides stable distance signal control regardless of target color or brightness. Very small objects can be detected reliably due to the small and sharply projected measurement spot size. |
N/A
The combination of speed, size, performance and application variety defines a new class of laser sensors. The worldwide unique SMART sensor concept combines an integrated web interface with a compact sensor size. The excellent price/performance ratio enables new areas of use, especially for high volume applications in machine integration and factory automation. |
N/A
The optoNCDT 1320 models enable quick sensor commissioning with just a few clicks using the multifunction sensor button. Therefore, the user has the possibility to use the zero setting/mastering function or the trigger set up. An intuitive web interface enables the user to carry out extended sensor settings. The settings for the most common surface types can be selected using presets. Using the 'Standard‘, 'Changing surfaces‘ and 'Material with penetration‘ settings, precise measurement results are easily achieved without any complex optimization. |