COMPANY HEADER
Request Information
Blue Laser Sensor for direct reflection
The optoNCDT 2300-2DR high precision laser triangulation sensor is designed for highly dynamic measurements on reflective and shiny targets. The sensor can be fixed parallel to the measurement object, which greatly simplifies the installation process. Unlike conventional laser triangulation sensors, the optoNCDT 2300-2DR uses the directly reflected light of the laser. During measurements, the blue laser light is directly reflected by the measurement object onto the receiving optics. Due to the blue laser light, the signal on the receiver element is extremely stable, which means the sensor is able to measure to nanometer resolution. An extremely small laser spot size enables the detection of very small objects.
Unit of Measure

Specifications

Measuring Range

N/A 2 mm

Measuring Rate at 49.14 Kilohertz (kHz) Frequency

N/A 1 mm

Start of Measuring Range (SMR)

N/A 9 mm

Start of Measuring Range (SMR) for Measuring Rate at 49.14 Kilohertz (kHz) Frequency

N/A 9 mm

Midrange Measuring Range (MMR)

N/A 10 mm

Midrange Measuring Range (MMR) for Measuring Rate at 49.14 Kilohertz (kHz) Frequency

N/A 9.5 mm

End of Measuring Range (EMR)

N/A 11 mm

End of Measuring Range (EMR) for Measuring Rate at 49.14 Kilohertz (kHz) Frequency

N/A 10 mm

Linearity

N/A 0.6 µm

Linearity Full Scale Output (FSO)

N/A ≤±0.03 %

Resolution at 20 Kilohertz (kHz)

N/A 30 nm

Resolution at 20 Kilohertz (kHz) Full Scale Output (FSO)

N/A 0.0015 %
Switchable (Software) Measuring Rate1 N/A 1.5 kHz2.5 kHz5 kHz10 kHz20 kHz30 kHz49.14 kHz

Permissible Ambient Light

N/A 10,000 to 40,000 lux

Spot Diameter at Start of Measuring Range (SMR)

N/A 21.6 x 25 µm

Spot Diameter at End of Measuring Range (EMR)

N/A 22.4 x 23.7 µm

Light Source

N/A Semiconductor Laser

Laser Power

N/A < 1 mW

Laser Wavelength

N/A 405 nm

Laser Color

N/A Blue Violet

Laser Safety Class

N/A Class 2

Protection Class

N/A Ingress Protection (IP65)

Operating Temperature

N/A 0 to 50 ºC

Storage Temperature

N/A -20 to 70 ºC
Control Input/Output (I/O)2 N/A EtherCAT Ethernet RS422

Inputs

N/A Laser On/Off Synch Trigger

Power Supply

N/A 11 to 30 V

Standard Sensor Cable with Connector

N/A 0.25 m

Sensor Cable Option

N/A 3/10 m with 15-Pole Sub-D Connector

Electromagnetic Compatibility (EMC) Requirements

N/A According to EN 55011/12.1998 and EN 50082-2/ 02.1996

Intended Application

N/A Displacement

Sensor/ Detector/Transducer Type

N/A Laser

Note for Measuring Rate

N/A Range Specifications: Value in Brackets is Valid for a Measuring Rate of 49.14 kHz

Spot Diameter at Midrange Measuring Range (MMR)

N/A 8.5 x 11 µm

Power Supply

Direct Current (DC) Power Supply

N/A 24 V

Power Supply for 24 Volt (V) Voltage

N/A <2 W

Displays

Light Emitting Diode (LED) Display Power Color

N/A Green

Light Emitting Diode (LED) Display Status (Off)

N/A Laser Off

Light Emitting Diode (LED) Display Status (Red)

N/A Out of Range Poor Target

Light Emitting Diode (LED) Display Status (Yellow)

N/A Midrange (MMR)

Light Emitting Diode (LED) Display Status (Green)

N/A Ok

Light Emitting Diode (LED) Display Status Color

N/A Green Red Yellow

Light Emitting Diode (LED) Display Power (Off)

N/A Power Off

Light Emitting Diode (LED) Display Power (Green)

N/A Ethernet RS422

Vibration

Vibration Amplitude

N/A 2 g.

Vibration Frequency Range

N/A 20 to 500 Hz

Shock

Shock Amplitude

N/A 15 g.

Shock Duration

N/A 6 ms

Number of Shock Applied Axes

N/A 3

Features

Features

N/A Blue Laser Technology (Blue violet laser diode 405 nm)
Adjustable measuring rate up to 49.14kHz
Ethernet / EtherCAT / RS422 Analog ouput via C-Box/2A
Advanced Real-Time-Surface-Compensation
Calibration certificate included
Configuration via web interface

Additional Information

Additional Information

N/A High speed and precision on reflective, shiny surfaces
The optoNCDT 2300-2DR offers an adjustable measuring rate up to 49 kHz and so is suitable for dynamic high speed process monitoring. The new A-RTSC (Advanced Real Time Surface Compensation) feature is a development of the proven RTSC technology and enables more precise real time surface compensation when measuring onto different surface types. The sensor is used for production control purposes such as thickness measurement of flat glass, assembly monitoring of extremely small parts and for distance measurements on annealed glass.

Compact and easy to integrate
The entire electronics is integrated in a compact sensor housing which is a worldwide unique feature of this sensor class. Data output is via Ethernet, RS422 or EtherCAT. The EtherCAT version will be available from Q2/2017. If the sensor is operated with the C-Box/2A signal processing unit (optional), an analog output is also available. All sensor configurations are carried out using a user-friendly web interface.

Accessories

Accessories

N/A Power supply
PS 2020 (power supply 24 V / 2.5 A, input 100 - 240 VAC, output 24 VDC / 2.5 A, mounting onto symmetrical standard rail 35mm x 7.5mm, DIN 50022)

Controller unit for evaluation and signal conversion
CSP 2008 (controller for multiple signal processing; analog and digital interfaces)

Controller unit for evaluation and signal conversion
C-Box/2A (controller for conversion and evaluation of up to two sensor signals)

Interface card
I F2008 (interface card for multiple signal processing; analog and digital interfaces)

USB converter
F2001/USB RS422/USB Converter (converter for digital signals in USB)

USB converter
IF2004/USB 4 channels RS422/USB Converter (converter, up to 4 digital signals in USB)

Accessories for optoNCDT 1320/1420/1402CL1

N/A Supply and output cable, drag-chain suitable
Item # - PCF1420-1/I
Item Description - 1 m, output 4 to 20 mA

Item # - PCF1420-1/I
Item Description - 1 m, output 4 to 20 mA

Item # - PCF1420-3/I
Item Description - 3 m, output 4 to 20 mA

Item # - PCF1420-6/I
Item Description - 6 m, output 4 to 20mA

Item # - PCF1420-10/I
Item Description - 10 m, output 4 to 20 mA

Item # - PCF1420-15/I
Item Description - 15 m, output 4 to 20 mA)

Item # - PCF1420-3/U
Item Description - 3 m, with integrated resistor, output 1 to 5 VDC

Item # - PCF1420-6/U
Item Description - 6 m, with integrated resistor, output 1 to 5 VDC

Item # - PCF1420-10/U
Item Description - 10 m, with integrated resistor, output 1 to 5 VDC

Item # - PCF1420-15/U
Item Description - 15 m, with integrated resistor, output 1 to 5 VDC

Item # - PCF1420-3/IF2008
Item Description - 3 m, interface and supply cable

Item # - PC1420-6/IF2008
Item Description - 6 m, supply and output cable

Item # - PCF1420-10/IF2008
Item Description - 10 m, interface and supply cable

Item # - PC 1402-3/CSP
Item Description - 3 m, connection cable for CSP 2008, only for optoNCDT 1420

on request with output 2 to 10 VDC

Supply and output cable, suitable for use with robots
(available in 90º version)
Item # - PCR 1402-3/I
Item Description - 3 m

Item # - PCR 1402-6/I
Item Description - 6 m

Item # - PCR 1402-8/I
Item Description - 8 m

Accessories for optoNCDT 1610/1630

N/A Supply and output cable
Item # - PC 1605-3
Item Description - 3 m

Item # - PC 1605-6
Item Description - 6 m

Item # - PC 1607-5/BNC
Item Description - 5 m, BNC connector

Accessories for optoNCDT 1700/1700LL/1700BL

N/A Supply and output cable (drag-chain suitable)
Item # - PC 1700-3
Item Description - 3 m

Item # - PC 1700-10
Item Description - 10 m

Item # - PC 1700-10/IF2008
Item Description - 10 m, for use with interface card IF2008

Item # - PC 1700-3/T
Item Description - 3 m, for use with trigger box

Item # - PC 1700-10/T
Item Description - 10 m, for use with trigger box

Item # -PC 1700-3/USB
Item Description - 3 m, with USB-RS422-converter, power supply 90 to 230 VAC

Supply and output cable (suitable for use with robots)
Item # - PCR 1700-5
Item Description - 5 m

Item # - PCR 1700-10
Item Description - 10 m

Supply and output cables for temperatures up to 200ºC
Item # - PC1700-3/OE/HT
Item Description - 3 m

Item # - PC1700-6/OE/HT
Item Description - 6 m

Item # - PC1700-15/OE/HT
Item Description - 15 m

Protection housing
Item # - SGHF (with air-purge collar)
Item Description - sizes S and M

Item # - SGH (without air-purge collar)
Item Description - sizes S and M

Item # - SGHF-HT (with water cooling)

Accessories for optoNCDT 2300/2300LL/2300BL

N/A Supply and output cable
Item # - PC2300-0,5Y
Item Description - connection cable to PC or SPS; for operation a PC2300-3/SUB-D will be required

Item # - PC2300-3/SUB-D
Item Description - 3m; for operation a PC2300-0,5Y will be required

Item # - PC 2300-3/CSP
Item Description - 3m, connection cable ILD2300-UniController

Item # - PC 2300-3/IF2008
Item Description - interface and supply cable

Item # - PC 2300-3/OE
Item Description - 3 m

Item # - PC 2300-6/OE
Item Description - 6 m

Item # - PC 2300-9/OE
Item Description - 9 m

Item # - PC 2300-3/CSP
Item Description - 3m, connection cable ILD2300-UniController

Item # - PC 2300-10/CSP
Item Description - 10m, connection cable ILD2300-UniController

Item # - PC 2300-15/CSP
Item Description - 15m, connection cable ILD2300-UniController

Item # - PC 2300-15/OE
Item Description - 15 m

other cable lengths on request

Item # - SGHF (with air-purge collar)
Item Description - sizes S and M

Item # - SGH (without air-purge collar)
Item Description - sizes S and M

Item # - SGHF-HT (with water cooling)

Supply and output cables for temperatures up to 200ºC
Item # - PC2300-3/OE/HT
Item Description - 3 m

Item # - PC2300-6/OE/HT
Item Description - 6 m

Item # - PC2300-9/OE/HT
Item Description - 9 m

Item # - PC2300-15/OE/HT
Item Description - 15 m
  • 1 49.14 kHz with Reduced Measuring Range
  • 2 Available from Q2/2017