COMPANY HEADER
Request Information
The new thicknessSENSOR is a sensor for precise thickness measurement of strip and plate material. This fully assembled system comprises a stable frame on which two laser triangulation sensors are fixed that detect the material thickness according to the difference principle.

The evaluation unit integrated into the frame calculates the thickness values and outputs these via different interfaces.
Unit of Measure

Specifications

Measuring Range

 N/A 10 mm

Operating Gap

 N/A 46 mm

Measuring Width

 N/A 200 mm

Combined Linearity Tolerance (±)

 N/A 10 µm

Measuring Rate

 N/A 0.25 kHz0.5 kHz1 kHz2 kHz4 kHz

Light Source - Semiconductor Laser Wavelength

N/A 670 nm<1 mW

Light Source Color

 N/A Red

Permissible Ambient Light

 N/A 10,000 lux

Maximum Light Spot Diameter

 N/A 140 x 160 µm

Maximum Light Spot Diameter Tolerance (±)

 N/A 10 %

Protection Class

 N/A Ingress Protection (IP65)

Laser Safety Class

 N/A Class 2 According to DIN EN 60825-1 : 2008-05

Temperature Stability Full Scale Output (FSO)

 N/A ±0.03 %/°C

Non-Condensing Operating Temperature

 N/A 0 to +50 ºC

Non-Condensing Storage Temperature

 N/A -20 to +70 ºC

Control Input/Output (I/O)

 N/A 1x Master 1x Trigger in 2x Switching Outputs

Analog Measurement Output Voltage

 N/A 0 to 5 V0 to 10 V

Analog Measurement Output Voltage Tolerance (±)

 N/A 5 V10 V

Analog Measurement Output Current

 N/A 4 to 20 mA

Digital Measurement Output

 N/A Ethernet

Weight

 N/A 2.8 kg

Display Sensor

 N/A 3x color LEDs for power and status

Controller Display

 N/A Power Input/Output (I/O)

Web Interface Operation

 N/A Data Reduction Limit Values Selectable Averaging Possibilities Setup Management

Power Supply for 24 Volt (V) Voltage

 N/A <5 W

Direct Current (DC) Power Supply

 N/A 11 to 30 V

Electronics

 N/A Integrated Signal Processor Signal Processing Unit

Electromagnetic Compatibility (EMC) Requirements

 N/A DIN EN 61326-1 DIN EN 61326-1 (class B) EN 61 000-6-2 EN 61 000-6-3

Vibration

Vibration Amplitude

 N/A 2 g.

Vibration Frequency Range

 N/A 20 to 500 Hz

Shock

Shock Amplitude

 N/A 15 g.

Shock Duration

 N/A 6 ms

Number of Shock Applied Axes

 N/A 3

Features

Features

 N/A
  • Immediately ready for use due to perfectly harmonized components
  • Easy integration and operation
  • Precise measurement results with high dynamic
  • Non-contact and wear-free measurement
  • Compact system

Additional Information

Additional Information

 N/A Compact design and high precision
The thicknessSENSOR enables turnkey thickness measurement along with an unmatched price/performance ratio. Due to its extremely compact design, this sensor system can also be integrated in a confined installation space.

The two sensors are perfectly adjusted to each other in terms of their mounting conditions, therefore providing high measurement accuracy. Using a calibration target, the sensors can be calibrated at any time.

Unique ease of use
The thicknessSENSOR is operated using an intuitive web interface. The settings for the measurement task can be quickly selected using predefined presets. Different configuration and set up possibilities enable the user to easily adapt the sensor e.g. to dynamic measurements.

Up to eight user-specific sensor settings can be stored and exported in the setup management. The signal peak selection and a freely adjustable signal averaging enable the experienced user to optimize the measurement task.

Note

Note

 N/A The sensor for precise thickness measurements
FSO = Full scale output